Teocht Íseal ASTM A333 Gr.6 Smls Gan uaim Rollta Te Píopaí agus Feadáin Líne Cruach Carbóin

Áit Origin:	Shandong, an tSín
Ainm Brand:	jinzheng
Uimhir Samhail:	16MnDG、10MnDG、09DG、09Mn2VDG、06Ni3MoDG、ASTM A333-Grade1、Grade3、Grade4、Grade6、Grade7、Grade8、Grade9、Grade10、Grade11
deimhniúchán:	API, CE, Bsi, RoHS, SNI, BIS, SASO, PVOC, SONCAP, SABS, sirm, tisi, KS,, GS, ISO9001
Cainníocht Ordú Íosta:	1 ton
Praghas:	$ 650 / tonna
Sonraí Pacáistiú:	Exported Packaging Standard(In bundles Nylon bags, wooden cases or as required )
Am Seachadadh:	15-20days
Téarmaí Íocaíochta:	FOB 30% T/T, 70% roimh loingsiú
	Réamhíocaíocht CIF 30% agus an t-iarmhéid le híoc sula ndéantar an loingsiú
	nó 100% L/C neamh-inchúlghairthe ag an radharc
Soláthar Cumas:	2000 Ton / Tonnaí in aghaidh na Míosa

Sonraigh go tapa:

16MnDG,10MnDG,06Ni3MoDG,GB/T6479,GB/T18984,seamless pipe，Seamless Carbon and Alloy Steel for Mechanical Tubing

A333 low temperature steel pipe is widely used in petrochemical, natural gas, chemical, electric power, heating and other fields. Its wide range of applications, flexible, In oil, natural gas transmission pipelines, petrochemical equipment, air conditioning system pipelines, coolers, steam generators, but also used in mechanical processing, pressure vessels, boiler manufacturing, building steel structure, large venues, exhibition centers, lifting machinery, shipbuilding, storage shelves, decoration, transportation facilities, airport construction, bridge support, mine support, three-dimensional garage, outdoor advertising, fitness equipment, Vehicle manufacturing and other industries

Riachtanais Cheimiceach

Eilimint	Comhdhéanamh, %
	Grád 1A	Grád 3	Grád 4	Grád 6A	Grád 7	Grád 8	Grád 9	Grád 10	Grád 11
Carbón, uas	0.30	0.19	0.12	0.30	0.19	0.13	0.20	0.20	0.10
Mangainéis	0.40-1.06	0.31-0.64	0.50-1.05	0.29-1.06	0.90 max	0.90 max	0.40-1.06	1.15-1.50	0.60 max
Fosfar, uas	0.025	0.025	0.025	0.025	0.025	0.025	0.025	0.035	0.025
Sulfar, uas	0.025	0.025	0.025	0.025	0.025	0.025	0.025	0.015	0.025
Sileacan	-	0.18-0.37	0.08-0.37	0.10 min	013-0.32	0.13 0.32	-	0.10-0.35	0.35 max
Nicil	-	3.18-3.82	0.47-0.98	-	2.03 2 57	8.40 9.60	1.60 2.24	0.25 max	35.0-37.0
Cróimiam	-	-	0.44-1.01	-	-	-	-	0.15 max	0.50 max
Copar	-	-	0.40-0.75	-	-	-	0.75-1.25	0.15 max	-
Alúmanam	-	-	0.04-0.30	-	-	-	-	0.06max	-
Vanaidiam, max	-	-	-	-	-	-	-	0.12	-
Columbium, max	-	-	-	-	-	-	-	0.05	-
moluibdín, uas	-	-	-	-	-	-	-	0.05	0.50 max
Cóbalt	-	-	-	-	-	-	-	-	0.50 max

Riachtanais Teanntachta

	Grád 1		Grád 3		Grád 6		Grád 7
	psi	MPA	psi	MPA	psi	MPA	psi	MPA
Neart teanntachta, minYield strength, min	55 00030 000	380205	65 00035 000	450240	60 00035 000	415240	65 00035 000	450 240
	Fadaimseartha	Aistrigh	Fadaimseartha	Aistrigh	Fadaimseartha	Aistrigh	Fadaimseartha	Aistrigh
Elongation in 2 in. or 50mm, (or 40). min, %:Basic minimum elongation for  walls 5/16 in. (8 mm) and over in thickness, strip tests.and for all small sizes tested in full sectionWhen standard round2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length  equal to 4D (4times the diameter) is  usedFor strip tests, a deduction for each 1/32 in. [0.8 mm] decrease in wall thickness below 5/16 in. (8 mm) from the basic minimum elongation of the following percentage	35 28 1.75B	25 20 1.25B	30 22 1.50B	20 14 1.00B	30 22 1.50B	16.5 12 1.00B	30 22 1.50B	22 14 1.00B

	Grád 8		Grád 9		Grád 10		Grád 11
	psi	MPA	psi	MPA	psi	MPA	psi	MPA
Neart teanntachta, minYield strength, min	100 00075 000	690515	63 00046 000	435310	80 00065 000	550450	65 00035 000	450 240
	Fadaimseartha	Aistrigh	Fadaimseartha	Aistrigh	Fadaimseartha	Aistrigh	Fadaimseartha
Elongation in 2 in. or 50mm, (or 40). min, %:Basic minimum elongation for walls 5/16 in. (8 mm) and over in thickness, strip tests.and for all small sizes tested in full sectionWhen standard round2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4times the diameter) is usedFor strip tests, a deduction for each 1/32 in. [0.8 mm] decrease in wall thickness below 5/16 in. (8 mm) from the basic minimum elongation of the followingpercentage	22 16 1.25B	--- --- ---	28 --- 1.50B	--- --- ---	22 16 1.25B	--- --- ---	18A --- ---

Tuairisc

1. Réamhrá gearr ar an táirge

Low-temperature seamless steel pipe is mainly used in petroleum, chemical, natural gas and coal as raw materials of ethylene, propylene, urea, synthetic ammonia, N-P-K composite fertilizer and pharmaceutical industry washing, purification, desulfurization and degrease production, as well as cryogenic equipment manufacturing, ultra-low temperature cold storage, transport ultra-low temperature liquefied gas pipeline and pipe components. The international low-temperature seamless steel pipe system is represented by ASTM A333/A333M-2011 (hereinafter referred to as the US standard), which is suitable for low temperature environment as low as -196℃. At present, the production and acceptance of low-temperature seamless steel pipe in the world mostly uses the US standard, and the domestic design also refers to the US standard. Among the nine grades of US standard cryogenic pipe, Gr.6 is widely used in the petrochemical industry and the fluid transport in low temperature and cold areas, and the annual demand in the US and European markets is more than 20,000 t.

2. Próiseas déantúsaíochta

Manufacturing - Tubes are made by welding processes that are seamless or do not add filler metal. Level 4 shall be made of seamless process.

Cóireáil teasa

All seamless and welded pipes shall be heat treated to control their microstructure by one of the following methods.

Uniformly heated to not less than 1500F (815℃) for positive heat treatment, and then air cooling or cooling in the cooling chamber of the controlled air oxygen furnace.

The steel pipe is normalized and reheated to an appropriate tempering temperature as determined by the steel mill. The pipe reheating well controls the hot processing, so that the operating temperature of the hot forming is controlled within the hot forming temperature range of 1550 to 1750F (845-945 ° C), and then it is cooled in the control gas oxygen furnace with an initial temperature of not less than 1550 (845 ° C). This method is only suitable for non-sewn tube processes.

It is treated and reheated to the appropriate tempering temperature as determined by the factory.

When specified in the order, the sample shall be cut from the thickness test block, which is taken from the steel pipe of the heat treated stone, and shall be stress-relieved. The test block shall be progressively heated to the specified temperature, moisturized at this temperature for the specified time, and then cooled to a temperature not higher than 600F (315 ° C). The test block of grade 8 steel pipe shall be air-cooled or water-cooled at a minimum cooling rate of 300F/ (165℃/h) to a temperature not higher than 600F (315℃).

3. Príomhbhranda nó grád cruach an táirge

ASTM A333-Grade1、Grade4、Grade6、Grade7、Grade9、Grade10

ASTM A334-Grade1、Grade6、Grade7、Grade9

API 5CT80、L80-1、L803Cr、P110

4. Caighdeáin cur chun feidhme táirge

GSTM 8333, GSTM 8334, API SPEC 5CT (9ú)

5. Gné táirge

The company is resistant to low temperature and no vascular, the use of low sulfur and low phosphorus high purity steel and calcification treatment, can effectively reduce the low temperature brittleness of steel, improve the impact toughness of products. The company has 0 "-100C cooling tank, which can carry out low temperature impact test in batches to ensure the quality and stability of products.

6. Timpeallacht úsáide táirge

A333 and A334 cryogenic tubes are used for -45-195C grade cryogenic lele vessel pipes and cryogenic heat exchanger pipes. They can also be used for fluid transport pipes in low temperature environments. The API5CT low-temperature resistant casing is mainly used for drilling Wells in extremely cold areas.The steel pipe can be used at extremely low temperatures, but also has high strength, corrosion resistance, good process ability and weld ability. These characteristics make the A333GR.6 low temperature steel pipe widely used in oil, natural gas, chemical and other industrial fields.

7. Raon sonraíochta táirge

Trastomhas lasmuigh: 16mm ~ 323.9mm; Tiús balla: 2.0mm ~ 40.0mm

Iarratais:

Widely used in petrochemical, natural gas, chemical, electric power, heating and other fields. Its wide range of applications, flexible, In oil, natural gas transmission pipelines, petrochemical equipment, air conditioning system pipelines, coolers, steam generators, but also used in mechanical processing, pressure vessels, boiler manufacturing, building steel structure, large venues, exhibition centers, lifting machinery, shipbuilding, storage shelves, decoration, transportation facilities, airport construction, bridge support, mine support, three-dimensional garage, outdoor advertising, fitness equipment, Vehicle manufacturing and other industries3

sonraíochtaí:

Caighdeáin píopa cruach gan uaim

API SPEC 5L
Ainm Táirge	Caighdeán Feidhmiúcháin	Toise (mm)	Cód Cruach / Grád Cruach
Píopaí Líne	API 5L	Ø10.3~1200xWT1.0~120	A, B, X42, X46, X52, X60, X70, X80, PSL1 / PSL2

API SPEC 5CT
Ainm Táirge	Caighdeán Feidhmiúcháin	Toise (mm)	Cód Cruach / Grád Cruach
Cásáil	API 5CT	Ø114~219 × WT5.2~22.2	J55, K55, N80, L80, P110
tubing	API 5CT	Ø48.3~114.3 × WT3.2~16	J55, K55, N80, L80, P110

ASTM / ASME
Ainm Táirge	Caighdeán Feidhmiúcháin	Toise (mm)	Cód Cruach / Grád Cruach
Píopaí Cruach Gan uaim atá Brataithe le Sinc Dubh agus Te-tumtha	ASTM A53	Ø10.3~1200xWT1.0~150	Gr.A, Gr.B, Gr.C
Píopaí Cruach Carbóin Gan uaim le haghaidh Seirbhíse Ardteochta	ASTM A106	Ø10.3~1200xWT1.0~150	Gr.B, Gr.C
Feadáin Malartóra Teasa agus Comhdhlúthadáin Cruach Íseal Carbóin Fuar-Tarraingthe	ASTM A179	Ø10.3~426x WT1.0~36	Cruach Ísealcharbóin
Feadáin Coire Cruach Carbóin gan uaim le haghaidh Ardbhrú	ASTM A192	Ø10.3~426 × WT1.0~36	Cruach Ísealcharbóin
Feadáin Malartóra Teasa agus Comhdhlúthadáin Cruach Idirmheánacha Fuar-Tharraingthe Gan uaim	ASTM A199	Ø10.3~426 × 1.0~36	T5, T22
Coirí Cruach Meán-Carbóin gan uaim agus Feadáin Sárthéiteora	ASTM A210	Ø10.3~426 × WT1.0~36	A1, C
Coirí Cruach Cóimhiotail Feiritiúla & Austenític gan uaim, Feadáin Sárthéitheoir & Malartóra Teasa	ASTM A213	Ø10.3~426 × WT1.0~36	T5, T9, T11, T12, T22, T91
Carbóin Gan uaim agus Cruach Cóimhiotail le haghaidh Feadáin Mheicniúil	ASTM A333	Ø1/4"~42"xWTSCH20~XXS	Gr.1, Gr.3, Gr.6
Píopaí Cruach Carbóin Gan uaim & Táthaithe agus Píopaí Cruach Alloy le haghaidh Úsáid Teocht Íseal	ASTM A334	Ø1/4"~4"xWTSCH20~SCH80	Gr.1, Gr.6
Feadáin Téitheoir Uisce Beatha Cruach Carbóin Fuar-Tarraingthe gan uaim	ASTM A556	Ø10.3~426 × WT1.0~36	A2, B2

DIN
Ainm Táirge	Caighdeán Feidhmiúcháin	Toise (mm)	Cód Cruach / Grád Cruach
Feadáin Cruach Gan uaim le haghaidh Teocht Ardaithe	DIN 17175	Ø10~762 × WT1.0~120	St35.8, St45.8, 10CrMo910, 15Mo3, 13CrMo44, STPL340, STB410, STB510, WB36
Feadáin Cruach Gan uaim	DIN 1629 / DIN 2391	Ø13.5~762 × WT1.8~120	St37.0, St44.0, St52.0, St52.3
Feadáin Cruach Gan uaim	DIN 2440	Ø13.5~165.1 × WT1.8~4.85	St33.2
Píopaí Cruach Gan uaim chun críche Struchtúrtha	DIN 2393	Ø16~426 × WT1.0~36	RSt34-2, RSt37-2, RSt44-2, St52

BS
Ainm Táirge	Caighdeán Feidhmiúcháin	Toise (mm)	Cód Cruach / Grád Cruach
Feadáin Cruach Gan uaim le haghaidh Struchtúr Meaisín	BS 970	Ø10~762x WT1.0~120	Cruach Carbóin
Feadáin Cruach Gan uaim le haghaidh Malartóirí Coire agus Teasa	BS 3059	Ø10~762x WT1.0~120	360,410,440,460, 490

Buntáiste Iomaíoch:

1. Meáchan éadrom.

The parameter is 1/5 of the square steel, so it has better weight and light performance, lighter than the square steel, and its weight is only 1/5 of the square steel.

2. Creimeadh agus friotaíocht teocht ard.

It has good corrosion resistance and high temperature resistance, better than square steel, A333 corrosion resistance to acid, alkali, salt and atmospheric environment corrosion, high temperature resistance, good impact resistance and fatigue resistance, does not need regular maintenance, effective service life can reach more than 15 years.

3, gan aon dífhoirmiúchán agus frith-statach.

It has good antistatic properties, better than ordinary steel pipes, seamless pipes are highly elastic, reused in mechanical equipment, no memory, no deformation, and antistatic, seamless pipes have excellent mechanical properties, easy machining, etc.