| Series | Hōʻike |
| mānoanoa | Mānoanoa foil: ka mānoanoa o 0.1 ~ 0.2mm o ka foil. |
| Hoʻokahi kīʻaha kīʻaha: nā pepa me ka mānoanoa o 0.01mm a emi iho ma mua o 0.1mm. | |
| Double zero foil: Double zero foil refers to two zero foils after the decimal point of its thickness mm, usually less than 0.01 thickness of aluminum foil, that is, 0.005~0.009mm aluminum foil. |
|
| helehelena | ʻO ka pahu alumini i ʻōwili ʻia |
| Pepa alumini pepa | |
| kūlana | Hard foil: aluminum foil that has not been softened after rolling and has residue on the surface when it is not degreased. Therefore, the hard foil must be degreased before printing, laminating and coating, and can be used directly if used for molding. |
| Semi-paʻa pepa: ʻO ka paʻakikī (a i ʻole ka ikaika) o ka pepa alumini ma waena o ka pepa paʻa a me ka pepa palupalu, i hoʻohana mau ʻia no ka hana ʻana. | |
| Soft foil: The aluminum foil that is completely annealed after rolling is soft and has no residual oil on the surface. Soft foils are used in most applications such as packaging, composite materials, electrical materials, etc. |
|
| ili | Single-side bright aluminum foil: double-rolled aluminum foil, one side of light and one side of black after the roll. The thickness of single-sided aluminum foil usually does not exceed 0.025mm. |
| Double-sided aluminum foil: single rolled aluminum foil, both sides are in contact with the roll, and the two sides of aluminum foil are divided into mirror double-sided aluminum foil and ordinary double-sided aluminum foil due to the different surface roughness of the roll. The thickness of double-sided optical aluminum foil is generally not less than 0.01mm. |
|
| kaʻina | ʻO ka pepa paʻa: alumini ʻaʻole i hana ʻia ma hope o ka ʻōwili ʻia ʻana, ʻike ʻia hoʻi he pepa māmā |
| ʻO ka pepa i hoʻopaʻa ʻia: ʻO ka pahu alumini i kaomi ʻia me nā ʻano like ʻole ma ka ʻili. | |
| ʻO ka pepa i hoʻohui ʻia: ka pepa alumini a me ka pepa, ke kiʻiʻoniʻoni, ka paʻa pahu pahu i loko o ka pahu alumini hui. | |
| ʻO ka pepa i uhi ʻia: ʻO ka pahu alumini i uhi ʻia me nā resins a i ʻole nā pena. | |
| ʻO ka pahu alumini kala: ʻO ka pahu alumini i uhi ʻia me kahi ʻili kala. | |
| ʻO ka pepa alumini paʻi ʻia: ʻO ka pahu alumini i hana ʻia i nā ʻano like ʻole, nā ʻano, nā huaʻōlelo a i ʻole nā kiʻi ma luna o ka ʻili hiki ke hoʻokahi kala, a hiki i 12 kala. |
'Apono kūpono:
1. Kūpaʻa kūpaʻa maikaʻi
The surface of the aluminum foil is covered with an oxide layer, which can improve its corrosion resistance and extend its service life.
2. Hana ikaika i ka hoʻoheheʻe wela
The surface covering layer of aluminum foil can not only protect the metal itself from oxidation, but also form the effect of heat insulation and prevent the loss of internal temperature.
3. ʻO ka plasticity ikaika
As a very thin metal product, aluminum foil has strong ductility and plasticity, and can withstand various shapes and be used as a container.
4. Nā kikoʻī like ʻole
Aluminum foil has a very wide range of specifications, thickness, width, length can be adjusted to meet a variety of different needs.
Makemake kā mākou hui aloha e lohe mai iā ʻoe!
Kuleana kope © Shandong Changshengda Steel Co., Ltd Ua mālama ʻia nā kuleana āpau
EN
