EN
Collecting the Required Tools:
If the time comes to install new pipes in the home, Jinzheng stainless steel pipes are an excellent option for this task. These pipes are still strong and durable, hence they can be used for plumbing. Before getting started on your project, collecting all the tools that will be required to complete the job is essential. A right tool will allows you to get the work done safely and promptly. Here are some of the essential tools you need:
Pipe cutter: This is a specific tool that cuts the pipe to the needed size. Well, this matters because if the pipe did not get cut correctly, it might not fit correctly.
Pipe wrench: This is also known as a spanner wrench, as well and is used for tightening or loosening the pipes. It provides a nice feel so that it is quite easy to connect the pipes.
Teflon tape: This stuff is your BFF. It forms a snug fit around the pipe connections, thereby making it leak-proof.
Step 1: Measuring and Cutting the Pipes
The user must use Jinzheng stainless steel pipes. If its pipes are too long or too short, they won't be able to connect properly at the other end. Here, read how to measure and cut your pipes in three simple steps:
First, get the distance between the points that need to be connected by pipes. You can do this with a measuring tape.
After you have the proper measurement, use a pencil or marker to mark where you will need to cut the pipe. This will ensure that you know exactly where to cut.
Now pick up the pipe cutter and cut the pipe off. Be cautious and ensure a straight cut on the pipe. Make sure to cut straight so that the pipes fit together better.
Fittings: The Linking of the Pipes
Once you have cut the pipes to the correct length, connecting them with fittings is next. They are special type pieces that help glue the pipes together. So here is how to connect the pipes, step by step:
First, you must scrub both sides of the pipe using a wire brush. This will clean away any dirt and debris that could lead to problems down the line.
After that, wrap Teflon tape on the threads of the fitting. This tape ensures that the connection is going to be tight, not leaking.
Now just attach the fitting to one end of the pipe. Make sure it is on securely.
You can use the pipe wrench to tighten the fitting. Twist it nice and tight, but not so tight that it's unmovable.
Do the exact same thing on the other side of the pipe, attaching to the second fitting. Double-check both of these connections (they should be snug).
Securing the Pipes in Place:
With the pipes now connected, you really need to secure them to ensure they remain in location. This is very important to avoid any movement that may cause leaks. Here’s how to insulate the pipes:
Adhere pipe clamps to attach the pipe tightly against a wall or a robust surface. Clamps help stabilize the pipes and are therefore very useful.
Be certain to use enough clamps to securely hold the pipe in place. If you don’t use a sufficient amount, then the pipe can slide around, which cause issues down the line.
Testing for Leaks and Final Touches:
In fact, checking for leaks before completing your installation is extremely critical. This will allow you ensure each system is running smoothly. Here’s how to check for leaks effectively:
Reopen the water supply and meticulously inspect all the connections for leaks. Bend down and see if a drip is coming out.
So, if there aren’t any leaks, congratulations! Now you are all set to complete the installation.
Use a wire brush to clean rough edges on the pipe. They will help avoid any injuries or damage.
3You can paint this pipe and the fittings and/or connectors, if you like. This won’t just make them look nice but also help prevent rust building up with time.
Conclusion:
Installing Jinzheng stainless steel pipes is the best way to maintain your home plumbing system for a long time. Now that you have that simple guide, you can install new pipes in no time! Don't forget to prepare your tools, measure and cut the pipes, connect pipes with fittings, fasten the pipes in place, and inspect for leaks before completing the installation. So with a bit of time and care it may be worth knowing that your plumbing system will serve you for many years, just how you want it to!
